If You Squint It Might Look Like It Belongs on an Airplane

Posted on

Cut three ribs for the fin today, nothing glued yet. The top and bottom ribs are made from RS-8 and RS-1 as detailed in section C-C on drawing 10. I have not cut the RS-1 pieces yet. The bottom RS-8 must be drilled and anchor nuts installed before assembly. The rear spar also needs some reinforcement blocks for the hinges installed and drilled before assembly. As you can see there is a considerable amount of work that will need done before I start glueing together.

The middle spars are made from RS-17 and must be notched to fit into the front and rear spars.

image

The fin is about 52inches ( 1.3meters ) tall.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s