Too Cold

Posted on

Worried that the epoxy will not cure properly with it being so cold.

Assembled the fin and rudder spars, looks pretty good.



Those RS-2 pieces fill in the gap well.


Drilled the mounting holes in the root rib of the fin, then installed the two AN 366 F-1032 anchor nuts on the rib as detailed in section C-C on drawing 10. These nuts are held in place with tiny wood screws and will be used to attach the fin to the stabilizer.



Need to cut three more ribs then I can glue the major portions of the fin.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s