Stabilizer Taking Shape

Posted on Updated on

The first few parts of the stabilizer are glued. Bottom part of center rib and front nose block.

image

The block was held in place with staples.

image

The RS-9 block that attaches the stab to the fuselage was glued in place and secured with staples.

image

The rear verticle RS-5 on the center rib was glued in place, used my drill bits to hold in there.

image

The left and right outer ribs were glued, stapled and weight placed on top to keep things together while the glue dries. You can see the aluminum straight edge and some scrap wood pieces I stapled to the workbench to keep the spar from moving.

image

image

Once this is dry I will start working on the RS-17 ribs.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s