Fuselage Takes Shape

Posted on Updated on

Joined the fuselage sides together today. First tipping I did was glue the station four bulkhead in place. I used staples along the sides to attach it to the verticle member.

Station four bulkhead

Also, use a bad clamp to hold the bottom portion of the bulkhead in place.

Clamp holding station four bulkhead in place

Next I put the front spar carry through in place. Used a couple of small clamps to keep it lined up.

Clamp holding front spar carry through in place

Then I attached the two RS-8 members on the bottom and held them in place with some bar clamps.

Clamps holding RS-8 to bottom of fuselage

Tomorrow I will glue the rear spar carry through in place.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s