Fuselage Bottom Ply

Posted on Updated on

Attached the RS-670 bottom ply to the fuselage, lots of staples and 24″ bar clamps were needed. I only have eight bar clamps which is really the minimum, more would have made this easier.

I started at the back using staples and small clamps when I got to the first bend I put a bar clamp on each side of the bend.

image

Repeated this on the next bend.

image

image

Once everything was set I itemed the fuselage over and let the glue dry. Looks good from the inside.

image

image

image

Advertisements

One thought on “Fuselage Bottom Ply

    Justin said:
    May 19, 2014 at 8:08 am

    Pretty soon you will be able to sit in it and make airplane noises!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s