Time to assemble the right wing. First problem was how to put the front spar against the straight edge work the center strut gusset sticking out.
I grabbed some 1/8″ plywood scrap and stapled it onto the spar so I end up with a flat surface to rest on the straight edge.
Next I paced the front spar in place and stapled some blocks to keep it in place.
Used the square to make some reference lines so I can keep the wing square.
Slid all of the ribs onto the rest spar and now I have something that looks like a wing.
Before I can glue anything I need to make the drag braces.