Wing trailing edge

Posted on Updated on

With the compression members and drag braces in place the wing has been turned around with the trailing edge against the straight edge.
wpid-20141230_141338.jpg

With the wing already hanging off the edge of the workbench I decided not to use the wide straight edge and instead stapled some blocks against the straight edge and will use those blocks to keep the RS-15 trailing edge straight.
wpid-20141230_141040.jpg

I used scissors to cut the RS-533 gussets and the bench sander to bevel them.
wpid-20141229_161316.jpg

Then I glued ribs #2 through #9 to the trailing edge.
wpid-20141231_160157.jpg

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s